Key points
- Hollow metal doors and frames
- Interior commercial wood doors where applicable
- Storefront aluminum door applications
- Fire-rated door and frame assemblies
- Paired doors and exit openings
- Openings receiving access-control hardware
Commercial door & locksmith service
Scheduled door and frame projects
Commercial Door Installation in Washington DC
Commercial door measurement, door and frame selection, and hardware coordination for businesses and managed properties.
Serving Washington DC, with nearby Northern Virginia and Maryland requests reviewed by service location.
Start with the problem
Treat the opening as a coordinated system
A commercial door installation is more than a slab and hinges. Door material, frame preparation, wall condition, handing, swing, clearances, latching, closer, exit hardware, electrified hardware and finish all affect the result. A measured site assessment helps prevent incompatible parts and change orders.
Call about a single replacement, tenant improvement or multi-opening project. Have drawings, hardware schedules or fire-rating information ready when they exist.
Door or frame is beyond practical repair
New tenant or build-out opening
Hollow metal door and frame replacement
Storefront door replacement planning
Fire-rated assembly coordination
Hardware set needs to be specified
Access control must coordinate with the opening
General contractor needs a measured scope
Diagnosis and scope
Opening types to discuss
The site condition and project documents determine what can be quoted. The request should identify the wall/frame condition and whether existing hardware is to be reused, replaced or coordinated with another trade.
Commercial decision support
What to include in an estimate request
Photos are useful for the first conversation, but final selection usually needs field dimensions and verification of the existing opening. If a general contractor or architect controls the project, have the relevant door schedule and hardware set ready.
Key points
- Opening location, quantity and approximate size
- Existing door/frame material and visible damage
- Handing, swing and traffic/egress function
- Required rating or labels shown in project documents
- Lock, closer, panic/exit and access-control needs
- Desired schedule, site hours and delivery constraints
Service details
Repair or replace?
A repair may be the better commercial decision when the door and frame remain sound and a correctable hardware or alignment issue causes the failure. Replacement becomes more reasonable when the opening is damaged, repeatedly fails, is incompatible with required hardware or cannot support the intended use.
The estimate should separate immediate security work from the planned replacement if the existing opening must remain usable while materials are coordinated.
Key points
- Repair: localized, serviceable problem with a sound opening
- Replace: extensive damage, incompatibility or repeated failure
- Phase: temporary security followed by measured installation
- Coordinate: clarify responsibilities across door, electrical and finish trades
What happens next
How a scheduled request moves forward
Call with the service location and opening details. The request is reviewed and the available next step is confirmed directly.
Request a site assessment
Send the opening count, photos, building type, project contacts and available plans.
Measure and define the hardware set
Verify dimensions, handing, frame/wall condition, functions and trade interfaces.
Approve scope and schedule
Confirm materials, exclusions, lead-time assumptions, access and who handles related trades.
Install and review operation
Set the opening and included hardware, then review swing, closing, latching and authorized deliverables.
Commercial property types
Built for facility and business needs
- Office and tenant build-outs
- Retail and restaurant storefronts
- Schools and medical facilities
- Warehouses and service buildings
- Commercial common-area doors
- General contractor projects
Commercial door, lock and hardware service for businesses and managed properties.
Request service
Review the project details we will ask for
The disabled form shows the building, opening-count and project details to prepare before calling.
Call to Discuss the Project 703-244-0559Commercial FAQ
Questions about this commercial service
Can I get a commercial door estimate from photos?
Photos can start the scope, but final pricing or ordering may require field measurement, handing, frame/wall review and hardware verification.
Do you install hollow metal doors and frames?
Hollow metal openings are within the planning scope described here. Final availability, fire rating, preparation and related trade work must be confirmed in the estimate.
Can access control be coordinated with a new door?
Yes, the door-side preparation can be discussed with the access-control requirements. The scope must identify who provides power, controls, cabling, devices and commissioning.
When is repair better than replacement?
Repair is often preferable when the door/frame is sound and the failure is limited to serviceable hardware or alignment. A site assessment helps compare the two options.
Ready to define the commercial scope?
Commercial installation, inspection and planned repair service for businesses and managed properties.